Chipsee Products Naming Rules
|CS||Chipsee Product Abbreviate|
80 Means 800 Pixel
10 Means 1024 Pixel
12 Means 1280 Pixel
14 Means 1440 Pixel
19 Means 1920 Pixel
480 Means 480 Pixel
600 Means 600 Pixel
768 Means 768 Pixel
800 Means 800 Pixel
900 Means 900 Pixel
102 Means 1024 Pixel
108 Means 1080 Pixel
|F(T)||Product based on Freescale (TI) CPU|
050 Means 5.0 Inch
070 Means 7.0 Inch
080 Means 8.0 Inch
097 Means 9.7 Inch
101 Means 10.1 Inch
104 Means 10.4 Inch
120 Means 12.0 Inch
150 Means 15.0 Inch
170 Means 17.0 Inch
190 Means 19.0 Inch
215 Means 21.5 Inch
|E||Means Embedded PC or Panel PC
E Means Embedded PC without Case
P Means Panel PC with Case
|C||Means Touch Type
R Means Resistive Touch
C Means Capacitive Touch
|1||Means LCD Brightness
1 Means Common Brightness
2 Means High Brightness
Baseboard PCB Version Number
SOM Module PCB Version Number
|Storage||TF card, supports up to 32GB SDHC|
|Display||7.0 Inch LCD,1024*600 Pixel Resolution
|Touch||Capacitive Touch (Five-Point)|
|USB||3 x USB 2.0 Host,1 USB OTG|
|LAN||1 Channel 1000M LAN|
|Audio||3.5mm Audio In/Out Connector, 2W Speaker Internal|
|RS485||2 Channels *|
|WiFi/BT||On Board WiFi/BT|
|SATA II||1 Channel|
|Power Input||6~36V DC|
|Current @ 15V||600 mA max|
|Power Consumption||6W Typical|
|Working Temperature||-20°C to +70°C|
|OS||Android, Ubuntu, Linux|
* This product has 5 channels of UART in total. The Bluetooth used one channel UART by default, the default setting is 2*RS232+2*RS485+Bluetooth. The UART can be changed between RS232 and RS485 easily. If you want different RS232 and RS485 setting, please contact us.
Figure 1 Top View (Android)
Figure 2 Back View
Power Input Connector
The product CS10600F070E/CS10600F070P uses a wide range power input: DC 6~36V. The total power consumption is about 6W normally. The Power Input Connector is 3 Pin 3.81mm Screw Terminal Connector as Figure 5 shows. The Character “+” means power Positive input, The Character “–” means power Negative input. The Character “G” means system Ground. Table 1 has detailed descriptions about the connector definition.
Figure 3 Power Input Connector
|Power Input Pin Definition:|
|Pin 1||Positive Input||Connect to DC Power Positive Terminal|
|Pin 2||Negative Input||Connect to DC Power Negative Terminal|
|Pin 3||Ground||Connect to Power System Ground|
The system ground “G” has been connected to power negative “-” on board.
The CAN+RS485+RS232 connector is a 16 Pin 3.81mm Screw Terminal Connector, as Figure 6 shows. As for the definition of every pin, please refer to Table 2.
This product has 5 channels of UART in total, they can be configured as RS232 or RS485 freely. If you need any other setting different to the default setting, please contact us.
Figure 6 CAN+RS485+RS232 Connector
|RS232 / RS485 / CAN Pin Definition:|
|Pin 16||CAN2_H||CPU CAN Channel 2 H signal|
|Pin 15||CAN2_L||CPU CAN Channel 2 L signal|
|Pin 14||CAN1_H||CPU CAN Channel 1 H signal|
|Pin 13||CAN1_L||CPU CAN Channel 1 L signal|
|Pin 12||RS485_2-||CPU UART2, RS485 –(B) signal|
|Pin 11||RS485_2+||CPU UART2, RS485 +(A) signal|
|Pin 10||RS485_5-||CPU UART5, RS485 –(B) signal|
|Pin 9||RS485_5+||CPU UART5, RS485 +(A) signal|
|Pin 8||RS485_4-||CPU UART4, RS485 –(B) signal|
|Pin 7||RS485_4+||CPU UART4, RS485 +(A) signal|
|Pin 6||RS232_3_RXD||CPU UART3, RS232 RXD signal|
|Pin 5||RS232_3_TXD||CPU UART3, RS232 TXD signal|
|Pin 4||RS232_1_RXD||CPU UART1, RS232 RXD signal|
|Pin 3||RS232_1_TXD||CPU UART1, RS232 TXD signal|
|Pin 2||GND||System Ground|
|Pin 1||+5V||System +5V Power Output, No more than 1A Current output.|
- UART2 signal has been used by Bluetooth signal on board. The RS485_2 function has been disabled by default. If customer needs to use RS485_2 function, please contact us, we will disable the Bluetooth function.
- All the CAN signal and RS485 signal have not mount on the 120Ohm Matched Resistance.
The product CS10600F070E/CS10600F070P uses ten-point capacitive touch, as Figure 7 shows.
Figure 7 Capacitive Touch Connector
Capacitive touch panels are very sensitive to power noise. Ripple voltage/current from the power adapter will cause the LCD ripples, and will also cause the capacitive touch malfunction: If you use the APK Multi-Touch under Android to test, you can find the touch point float. There are several ways to solve this problem:
1) Use a high quality power adapter. Or use battery to provide the power like cell phone or tablet PC.
2) If user power adapter can’t be good enough, there’s another effective method to solve this problem: Make sure the CS12800F101P-C111 power input connector Pin 3 really connect to user “Power System Ground”. This method can eliminate the problem totally. User can also use another method to test this problem: touch the GND of CS12800F101P-C111 by one hand, the other hand operates on the capacitive touch screen. In this case, user’s body acts as the Power System Ground.
USB HOST Connector
The product CS10600F070E/CS10600F070P has three USB connectors as Figure 8 shows.
Figure 8 USB HOST Connector
USB OTG Connector
The product CS10600F070E/CS10600F070P has one USB OTG connector as Figure 9 shows. It works as slave by default. User can connect it to host PC by this connector.
Figure 9 USB OTG Connector
The product CS10600F070E/CS10600F070P has one channel 1000Mbit Ethernet Connector, as Figure 10 shows.
Figure 10 LAN Connector
The product CS10600F070E/CS10600F070P has one TF (uSD) card connector as Figure 11 shows. This device supports TF (uSD) card up to 32GB.
Figure 11 TF Card Connector
The TF card slot is NOT mounted with any TF card by default.
The product CS10600F070E/CS10600F070P has one Audio Input (“Line-in”) and one Audio (“Line-out”) output, as Figure 12 shows. And the product has an internal 2W speaker.
Figure 12 Audio Connector
The product CS10600F070E/CS10600F070P has one HDMI connector as Figure 13 shows. The HDMI output resolution can be configured by software.
Figure 13 HDMI Connector
The product CS10600F070E/CS10600F070P has one WiFi+BT. It uses Realtech RTL8723 which integrates WiFi and BT, as Figure 14 shows. For CS10600F070P, there is a connector on the backside case which can connect external WiFi/BT Antenna, as Figure 15 shows.
Figure 15 WiFi+BT Antenna
The product CS10600F070E/CS10600F070P has a boot switch which can be used to change boot sequence, as Figure 16 shows. As for the details of the boot switch, please refer to Table 3.
Figure 16 Boot Switch
|Boot Config Select:|
The product CS10600F070E/CS10600F070P has one Expansion Connector, as Figure 17 shows. This connector is labelled as P21 on the PCB, and it has connected to CPU GPIO/Camera/I2C signals. As for the definition of every Pin, please refer to Table 4.
Figure 17 Expansion Connector
|Boot Config Select:|
|Expansion Connector Definition:|
|PIN||Function||CPU PIN||PIN||Function||CPU PIN|
All these signals connect to CPU directly. Please use it carefully, or the CPU will be damaged easily.
Measurements and Mounting
Measurements of CS10600F070E
The measurement of CS10600F070E -C131 is 190*107.8*27.7mm, as Figure 18 shows.
Mounting of CS10600F070E
The product CS10600F070E can be mounted using the 4 screw holes on the PCB as shown in Figure 14.Please make sure the display is not exposed to high pressure when mounting into an enclosure.
Figure 18 Dimension
Measurements of CS10600F070P
The measurement of CS10600F070P -C131 is 206*135*30.1mm.
Mounting of CS10600F070P
This product CS10600F070P can be mounted using the mounting set, as Figure 20 shows. Please make sure the display is not exposed to high pressure when mounting into an enclosure.
Figure 20 Mounting Method
How to Get Support
Chipsee assumes no responsibility for any errors, which may appear in this manual. Furthermore, Chipsee reserves the right to alter the hardware, software, and/or specifications detailed herein at any time without notice, and does not make any commitment to update the information contained herein. Chipsee products are not authorized for use as critical components in life support devices or systems.