The EPC-A9-70-C has several expansion connectors on the back side – 3 USB 2.0, 1 USB OTG, 1 LAN, 2 CAN, 2 RS485 and 2 RS232. It also features a WiFi and Bluetooth antenna, an HDMI port, and a 3.5mm audio connector.
The CAN, RS485, RS232 connector is a 16 Pin 3.81mm screw terminal connector (as you can see from the image).
Since this display has 5 UART channels, they can be configured as RS232 or RS485. One UART channel is used by Bluetooth – the default setting is 2x RS232 + 2x RS485 + Bluetooth. Please contact us if you require a different configuration.
The speed of the RS232 and the RS485 port is up to 115200 Baud.
The EPC-A9-70-C has one channel 1Gb Ethernet port and one HDMI port which can be configured by software. The maximum resolution supported on the external HDMI monitor is 1920×1080 at 60Hz.
When it comes to audio capabilities, the EPC-A9-70-C has one 3.5mm Output/input connector and a 2W internal speaker.
The EPC-A9-70-C uses a wide range of power input: DC 6~36V. The typical power consumption is 6W.