PPC-A9-150-C

The PPC-A9-150-C has several expansion connectors on the back side – USB 2.0, HDMI, LAN, CAN, RS485, and RS232 connectors. It also features a WiFi/BT module with an antenna and a 3.5mm audio connector. The 4G/LTE module is optional.

The WiFi/Bluetooth module is based on the Realtek RTL8723BS an 802.11bgn 2.4G single-chip that integrates Wireless LAN (WLAN) and an SDIO interface controller with integrated Bluetooth 2.1/3.0/4.0 controller. It combines a WLAN MAC, a 1T1R capable WLAN baseband, and WLAN RF in a single chip.

The CAN, RS485, and RS232 connector is a 16 Pin 3.81mm screw terminal connector (as you can see from the image).

Since this display has 5 UART channels, they can be configured as RS232 or RS485. One UART channel is used by Bluetooth – the default setting is 4 * RS232 + Bluetooth. Please contact us if you require a different configuration.

The speed of the RS232 and the RS485 port is up to 115200 Baud.

The PPC-A9-150-C has one channel 1Gb Ethernet port, and one HDMI port which can be configured by software. The maximum resolution supported on the external HDMI monitor is 1920×1080 at 60Hz.

When it comes to audio capabilities, the PPC-A9-150-C has one 3.5mm Output/input connector and a 2W internal speaker.

The PPC-A9-150-C features a 15’’ display with a 1024×768 pixel resolution, 250 nits brightness, and a 10-point capacitive touch screen that offers stable and accurate control over the device, as well as great image clarity.

When it comes to the viewing angle, the screen offers various angles: top, bottom, left, and right view.

If your application requires a secondary display the HDMI port on the back of the panel allows the device to work in a double monitor configuration up to 1920×1080 pixel resolution at a 60Hz refresh rate.